Welcome Guest [Login | Register]
VF Engineering - Side Engine Mount
VF Engineering - Side Engine Mount

Product Information

The VW factory Engine side mount connects the engine to the chassis and was designed as a soft flexible mount to provide a very comfortable drive. A drawback is the high amount of engine movement under torque load and on hard acceleration. This engine "slop" greatly decreases stability and smoothness under high performance driving conditions and rapid gear selection. 

The factory mount is constructed from a die-cast aluminum mount which houses a large soft rubber bush with a vulcanised cast strut. The rubber bush contains a viscous oil cavity to absorb shock. The 1-piece OEM rubber bush does not completely fill the pocket inside the mount casing, leaving it prone to break under severe driving conditions. The drawback of the OEM design for 'performance minded' drivers is that long term stresses from power enhanced engines tends to cause premature wear of the both the driver and passenger side engine mounts, which either leads to their viscous damper becoming very sloppy or the aluminum casing cracking completely. 

VF-Engineering designed, tooled up, and manufactured a complete new replacement, containing specially designed molded high durometer polyurethane bushes. The mount is constructed from billet (ingot) aluminum and supplied with high tensile hardware. Billet is physically twice as strong as cast and this mount is designed for strength. VF recommends changing side mounts in pairs only. Fitting should take no more than 60 minutes usually.

Product Code: vfa-06-03
Brand/Manufacturer: VF Engineering


$199.95
Quantity: Add to Cart

Be the first to review this product!


Bookmark and Share
Related Products
Shopping Cart
Your cart is empty.
0Items in cart:
$0.00Total:
View Cart
Featured Product
VF Engineering - Side Engine Mount
VF Engineering - Side Engine Mount
Newsletter
Sign up to get news of sales and special offers!
Email:
Shop by Category

Shop By Brand
Popular Products
  1. KMD Tuning - 2.0T FSI High Pressure Fuel Pump Kit
  2. KMD Tuning - 2.0T FSI KO4 Turbo Kit
  3. OEM - Set of 4 Audi RS4/RS8 Injectors
Hours of Operation
Monday — Friday:
8:00am to 5:00pm EST

(Most) Saturdays:
8:00am to 12:00pm EST

*excluding holidays




KMD Tuning & Engineering - 374 N Midland Ave, Saddle Brook, New Jersey 07663 - (201) 773-9171
About Us | Terms & Conditions | Privacy Statement | Contact Us