Discounts
$100OFF
ECU Stage 2+ Software
Stock Power : 200HP / 207LB-TQ Unitronic Stage 2+: 335HP / 335LB-TQ
93 OCTANE / 98 RON GAS
...
$700.00
ECU Stage 3 BT Software
Stock Power : 200HP / 207LB-TQ Unitronic Stage 3 BT: Up to 500HP
91-93 OCTANE / 95-98 RON GAS
...
$950.00
ECU Stage 1+ Software
Stock Power : 200HP / 207LB-TQ Unitronic Stage 1+ : 250HP / 292LB-TQ
93 OCTANE / 98 RON GAS
...
$600.00
ECU Stage 2 HPFP Software
Stock Power : 200HP / 207LB-TQ Unitronic Stage 2 HPFP: 275HP / 305LB-TQ
93 OCTANE / 98 RON GAS&n...
$675.00
ECU Stage 2 Software
Stock Power : 200HP / 207LB-TQ Unitronic Stage 2 : 260HP / 293LB-TQ
93 OCTANE / 98 RON GAS
H...
$650.00
ECU Stage 1 Software
Stock Power : 255HP / 243LB-TQ Unitronic Stage 1: 268HP / 258LB-TQ
91 OCTANE / 95 RON GAS
HP...
$550.00
ECU Stage 1 Software
Stock Power : 200HP / 207LB-TQ Unitronic Stage 1 : 245HP / 275LB-TQ
91 OCTANE / 95 RON GAS ...
$550.00
10% Milltek
This cat-back exhaust system is manufactured of a 2.5" T304 anti-magnetic stainless steel that is less susceptible to discolouration when compared to other...
$1,284.00
This cat-back exhaust system is manufactured of a 2.5" T304 anti-magnetic stainless steel that is less susceptible to discolouration when compared to other...
$1,194.00
This cat-back exhaust system is manufactured of a 2.5" T304 anti-magnetic stainless steel that is less susceptible to discolouration when compared to other...
$1,388.00
10% P3
P3 Multi-Gauge
Plug and Play install - just plug into your obd2 port and install into dash!
Reads and clears OBD2 Codes
OBD2 Data for Coolant Temp, In...
$389.00
P3 Boost gauge
Hard-wires in to power and ground and requires analog tubing to be run and connected to intake / charge pipe (does not plug into OBD2 ...
$289.00
10% ST
The ultimate in performance, style and handling. ST height adjustable Coilover kits are precision engineered and road tested to the highest standards of the Ger...
$929.00
The ultimate in performance, style and handling. ST height adjustable Coilover kits are precision engineered and road tested to the highest standards of t...
$929.00
15% CTS
CTS Turbo is pleased to offer our new Runner Flap Delete (RFD) for FSI engines including Golf R models.
The CTS Runner Flap Delete allows for the remov...
$109.99
CTS Turbo has been dedicated to manufacturing performance parts for enthusiasts by enthusiasts since its inception. Our continued development of the B7 A4 platf...
$1,049.99
Introducing the all-new CTS Turbo oil catch can kit for B7 Audi A4.
The oil catch can is used prevent oil vapors entering the intake manifold and c...
$399.99
We are proud to release the CTS PCV Revamp kit. The CTS PCV revamp was designed primarily as a fix to the PCV problems that commonly occur on FSI motors includ...
$99.99
This is the CTS Turbo Valve Cover Breather adapter for 2.0T FSI engines including Golf R.
This billet piece is constructed from T6061 aluminium and comes stand...
$99.99
15% GFB Stoptech
GFB expands the DV+ range with a direct-fit solution for the weak factory diverter valve used on many European vehicles.
Retains the factory solenoid coil...
$159.00
$143.10
StopTech Big Brake Kits improve aesthetics and exceed stock brake performance in three areas. First, larger rotors increase heat capacity. Second, improved brak...
$2,998.00
$2,698.20
StopTech Big Brake Kits improve aesthetics and exceed stock brake performance in three areas. First, larger rotors increase heat capacity. Second, improved brak...
$3,999.00
$3,599.10
StopTech Big Brake Kits improve aesthetics and exceed stock brake performance in three areas. First, larger rotors increase heat capacity. Second, improved brak...
$4,933.50
$4,440.15
StopTech Big Brake Kits improve aesthetics and exceed stock brake performance in three areas. First, larger rotors increase heat capacity. Second, improved brak...
$5,583.50
$5,025.15
StopTech Big Brake Kits improve aesthetics and exceed stock brake performance in three areas. First, larger rotors increase heat capacity. Second, improved brak...
$6,883.50
$6,195.15
The StopTech Sport Kit is an excellent choice for the enthusiast whose rotors are nearing the end of their service life. StopTech's Sport Kit includes direc...
$1,209.84
$1,109.80
20% CTS
The new CTS Turbo B7 A4 FMIC kit will enhance the performance and power of your vehicle substantially by maintaining lower charged air temperatures even u...
$749.99
The CTS Turbo billet aluminum valve cover for the 2.0T FSI EA113 engines is a direct replacement for your plastic factory valve cover.
These are designed as ...
$379.99
25% CTS
This Atmospheric Blow-off Valve Spacer from CTS Turbo is designed to fit any 2.0T EA113, EA888.1, EA888.2 FSI/TFSI/TSI engines.
The spacer is a pressure relea...
$89.99
5% 034
Replace your sloppy rubber factory sway bar end links with these new performance engineered spherical endlinks from 034Motorsport!
034Motorsport's Billet...
$208.00
Your B5/B6/B7 A4/S4/RS4 have that "not so fresh" feeling? Does it clunk and clack over driveways and speed bumps? Does it have the steerin...
$187.00
We are VERY excited to be announcing the release of our 034Motorsport Track Density strut mounts for B6/B7 and C7 Audis!
034Motorsport Density Lin...
$41.00
We're proud to announce the availability of the Density Line Engine Mounts for B5, B6, B7, and C5 Chassis Audi and B5 Chassis Volkswagen models!
034...
$104.55
We are VERY excited to be announcing the release of our 034Motorsport Street Density and Track Density transmission mounts for a wide range of Au...
$123.00
034Motorsport fully spherical upper control arms for the front B5, B6, and B7 A4/S4/RS4 applications. These are the same parts we run on the 034Motorsport Time ...
$607.00
034Motorsport is pleased to present our new Billet Aluminum Rear Differential Carrier Mount Insert Upgrade for the B6/B7 A4/S4/RS4! The factory Audi rear differ...
$115.00
We are VERY excited to be announcing the release of our 034Motorsport Street Density and Track Density transmission mounts for the 6-MT and CVT B...
$95.20
034Motorsport is proud to offer the ultimate rear sway bar upgrade for the B6/B7 A4/S4/RS4! The 034Motorsport Adjustable Solid Rear Sway Bar is made from high-q...
$300.00
These plug-in resistor bypasses can be used to remove the CEL caused by replacing the failure-prone factory "active" mounts with 034Motorsport Density...
$17.00
034Motorsport is proud to offer our Billet Aluminum Rear Subframe Bushing Kit for the B6/B7 A4/S4/RS4! The factory Audi rear subframe bushings are designed for ...
$262.00
Replace your flimsy, sloppy OEM sway bar end links with these performance engineered adjustable spherical endlinks from 034Motorsport!
034Motorsport's Ad...
$233.00
Finally deal with those rubber subframe bushings once and for all and dramatically increase the ability to hold suspension geometry under severe cornering force...
$199.00
This Density Line Lower Control Arm Kit for B6/B7 A4/S4/RS4 is perfect for use with our Adjustable Upper Control Arm Kit!
Density Line Control Arms are manuf...
$401.00
034Motorsport is proud to offer our fully adjustable upper control arms for the B5/B6/B7 and C5 chassis cars! These arms are perfect for those who have lowered ...
$585.00
We're proud to offer 034Motorsport Rear Adjustable Upper Control Arms for the B6/B7 A4/S4/RS4!
These arms are manufactured from billet aluminum and featu...
$564.00
034Motorsport's Density Line Adjustable Upper Control Arm Kit for Audi B5/B6/B7 and C5 chassis replaces the fixed factory front upper control arms to allow ...
$575.00
Does your B6/B7 A4/S4/RS4 have that "not so fresh" feeling? Does it clunk and clack over driveways and speed bumps? Does it have the steer...
$589.00
The 034Motorsport B7 A4 2.0T FSI Catch Can Kit is here! We've put months of engineering and testing to create the most complete and effective...
$565.00
034Motorsport High-Flow Catalytic Converters are designed to replace the restrictive factory catalytic converter, and allow for quicker spool while increasing h...
$467.00
-400x400.jpg "034 Motorsport Street Snub Mount w/ Bracket")
This snub bracket is designed for the included Polyurethane Snub Mount, and unlike other snub mount kits on the market that allow an "air gap" ar...
$108.00
We've been hard at work on our new 034Motorsport B7 A4 2.0T FSI Catch Can Kit! This kit was designed to offer bolt-on installation and hassle-free...
$391.00
OEM rubber turbo inlet boots do the job OK on a stock application, but are prone to problems once boost is turned up and performance increased.
Due to ...
$111.00
DIY breather port adapter to allow a provision for custom catch can setups on the Audi/VW 2.0T FSI.
Features:
CNC Machined from solid 6061 aluminum
A...
$75.00
5% KW
KW Street Comfort: Individual sport suspension with Maximum comfort
Height adjustable Street Comfort allows a lowering of 10-40mm depending on the vehicle. T...
$2,154.00
KW Variant 2: Sporty and personalized with adjustable rebound dampening.
This system is designed for the driver who requires not only determining the individ...
$2,564.00
KW Variant 1: Sporty - Balanced. With KW factory pre-set dampening.
The ideal system for customers who like to choose the customer lowering of their ve...
$2,024.00
KW Variant 3: Race technology for the road, with adjustable compression and rebound dampening.
State of the art motorsport technology enables better performa...
$2,854.00
KW Street Comfort: Individual sport suspension with Maximum comfort
Height adjustable Street Comfort allows a lowering of 10-40mm depending on the vehicle. T...
$2,154.00
KW Variant 1: Sporty - Balanced. With KW factory pre-set dampening.
The ideal system for customers who like to choose the custom lowering of their vehicles w...
$2,024.00
KW Variant 2: Sporty and personalized with adjustable rebound dampening.
This system is designed for the driver who requires not only determining the individ...
$2,254.00
KW Variant 3: Race technology for the road, with adjustable compression and rebound dampening.
State of the art motorsport technology enables better performa...
$2,854.00
7.5% DXD
Stage 3 Daily
Recommended for single mass flywheel (SMF) when original design is DMF. This clutch package is designed for high HP vehicles desiring a start p...
$1,440.62
$1,397.40
Stage 2 Daily
Engineered for HP modifications. This Heavy Duty Pressure Plate has an increased clamp load with little or no increase in pedal pressure. The O...
$1,178.69
$1,143.33
Stage 4 Extreme
This is a “build to order” clutch kit intended for cars with HP modifications exceeding the stage 3 parameters. The Race Engineer...
$1,964.48
$1,905.55